Grandstream GXP2130

From MiRTA PBX documentation
Jump to navigation Jump to search

This is an executive phone compatible with the predefined “Grandstream GXP” template.

Log into the phone interface

Gxp2130-1.png

Locate the Upgrade and Provisioning menu

Gxp2130-2.png

Configure as shown below

Gxp2130-3.png

In detail, select Upgrade via “HTTPS”, clean Firmware Server Path if not used, enter the Config Server Path as shown on the Configuration/Provisioning/Phones page, in this example: demo.mirtapbx.com/mirtapbx/autoprovision/RuLPYWuESutnFCtc/ Do not enter the protocol! Set the DHCP options to No if not used, save and apply. Reboot your phone.