Yealink pre v.72

From MiRTA PBX documentation
Revision as of 14:49, 30 June 2016 by Admin (talk | contribs) (Created page with "<pre> {line_loop} [ account ] path= /config/voip/sipAccount{$line_m1}.cfg Enable = {$line_active} Label = {$displayname} DisplayName = {$displayname} UserName = {$username} Au...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search 
{line_loop}
[ account ]
path= /config/voip/sipAccount{$line_m1}.cfg
Enable = {$line_active}
Label = {$displayname}
DisplayName = {$displayname}
UserName = {$username}
AuthName = {$authname}
password = {$secret}
MissedCallLog = {$missed_call_log|0}
AutoAnswer = {$auto_answer|0}
SIPServerHost = {$server_host}
SIPServerPort = {$server_port}
SIPListenRandom = 0
SIPListenPort = {$local_port}
Expire = {$server_expires}
UseOutboundProxy = {$enable_outbound_proxy_server}
OutboundHost = {$outbound_host}
OutboundPort = {$outbound_port}
EnableEncrypt = 0
EncryptKey = 29749
EncryptVersion = 1
BakOutboundHost = {$backup_outbound_host}
BakOutboundPort = {$backup_outbound_port}
EnableSTUN = {$enable_stun}
proxy-require = 0
ptime = 20
srtp_encryption = 0
srtp_encryption_algorithm = 0
BackupSIPServerHost = {$backup_server_host}
BackupSIPServerPort = {$backup_server_port}
Enable 100Rel = 0
precondition = 0
SubsribeRegister = 0
CIDSource = 0
EnableSessionTimer = 0
SessionExpires =
SessionRefresher = 0
EnableUserEqualPhone = 0
BLFList_URI =
SubsribeMWI = {$subscribe_mwi|1}
AnonymousCall = 0
RejectAnonymousCall = 0
Transport = {$transport|0}
ShareLine =
dialoginfo_callpickup =
AnonymousCall_OnCode =
AnonymousCall_OffCode =
AnonymousReject_OnCode =
AnonymousReject_OffCode =
BLANumber =
SIP Registration Retry Timer = {$sip_registration_retry_timer|30}

[ Message ]
path=/config/Features/Message.cfg
#Set voicemail number for each account
VoiceNumber{$line_m1} = {$voicemail_number}

[ audio0 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 1
PayloadType = PCMU
priority = 1
rtpmap = 0

[ audio1 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 1
PayloadType = PCMA
priority = 2
rtpmap = 8

[ audio2 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G723_53
priority = 0
rtpmap = 4

[ audio3 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G723_63
priority = 0
rtpmap = 4

[ audio4 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 1
PayloadType = G729
priority = 3
rtpmap = 18

[ audio5 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G722
priority = 0
rtpmap = 9

[ audio6 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = iLBC
priority = 3
rtpmap = 97

[ audio7 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G726-16
priority = 0
rtpmap = 112

[ audio8 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G726-24
priority = 0
rtpmap = 102

[ audio9 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G726-32
priority = 0
rtpmap = 2

[ audio10 ]
path=/config/voip/sipAccount{$line_m1}.cfg
enable = 0
PayloadType = G726-40
priority = 0
rtpmap = 104

[ DTMF ]
path=/config/voip/sipAccount{$line_m1}.cfg
DTMFInbandTransfer = 1
DTMFPayload = 101
DTMFToneLen = 300
InbandDtmfVolume = 0
RxLatency = 20
CPTToneCountry = 12
G726CodeWord = 1
InfoType = 0

[ NAT ]
path=/config/voip/sipAccount{$line_m1}.cfg
MaxRTPPort = 11800
MinRTPPort = 11780
NATTraversal = {$nat_trans}
STUNServer = {$stun_server}
STUNPort = {$stun_server_port}
EnableUDPUpdate = {$udp_keepalive_enable}
UDPUpdateTime = {$udp_keepalive_seconds}
rport = {$rport_enable}

[ ADVANCED ]
path=/config/voip/sipAccount{$line_m1}.cfg
default_t1 = 0.5
default_t2 = 4
default_t4 = 5

[blf]
path=/config/voip/sipAccount{$line_m1}.cfg
SubscribePeriod = 3600
{/line_loop}

[ VLAN ]
path = /config/Network/Network.cfg
#ISVLAN,VID and USRPRIORITY are used for VLAN on LAN port
#PC_PORT_VLAN_ENABLE,PC_PORT_VID and PC_PORT_PRIORITY are used for PC port
ISVLAN = {$voice_vlan_enable}
VID = {$voice_vlan_id}
USRPRIORITY = 0
PC_PORT_VLAN_ENABLE = {$data_vlan_enable}
PC_PORT_VID = {$data_vlan_id}
PC_PORT_PRIORITY = 0

[ ContactList ]
path = /tmp/download.cfg
#to specify a XML phonebook for update
#an example for a right server_address:http://192.168.0.132:9/file_provision/contactData1.xml
server_address = {$contact_list_address}

{loop_remotephonebook}
[ RemotePhoneBook{$number} ]
path = /config/Setting/Setting.cfg
URL = {$url}
Name = {$name}
{/loop_remotephonebook}

[ ringtone ]
path = /tmp/download.cfg
#to specify a ringtone for update
#the format of the ringtone must be WAV
#an example for a right server_address:ftp://wxf:123456@192.168.0.132:21/Ring20.wav
server_address = {$ringtone_url}

[Logo]
path = /tmp/download.cfg
server_address = {$logo_url}

[ Features ]
path = /config/Features/Phone.cfg
Call_Waiting = 1
Hotlinenumber =
BusyToneDelay =
LCD_Logo = {$lcdlogo}
DND_Code = 480
Refuse_Code = 480
DND_On_Code = *181
DND_Off_Code = *182
ButtonSoundOn = 1

[ Webserver Type ]
path = /config/Advanced/Advanced.cfg
WebType =

{loop_memkey}
[ memory{$key} ]
path = /config/vpPhone/vpPhone.ini
Line = {$line}
type = {$parameter}
Value = {$extension}
Callpickup =
DKtype = {$type}
PickupValue = {$pickup_value}
{/loop_memkey}

#START Line Key Options
{loop_linekey}
[ memory{$number} ]
path = /config/vpPhone/vpPhone.ini
type = {$mode}
DKtype = {$type}
Line = {$line}
Value = {$extension}
{/loop_linekey}
#END Line Key Options

#START DialNow configuration
[ DialNow ]
path = /tmp/dialnow.xml
{loop_dialnow}
{$count} = {$rule}
{/loop_dialnow}
#END DialNow configuration

{loop_sdext38}
[ Key{$number} ]
Path = /config/vpPhone/Ext38_00000000000001.cfg
DKtype = {$type}
Line = 0
Value = {$value}
type = {$btype}
PickupValue = {$pickup_value}
Label = {$label}
{/loop_sdext38}

#START Soft Keys
{loop_softkey}
[ programablekey{$number} ]
path = /config/vpPhone/vpPhone.ini
Label = {$label}
DKtype = {$type}
Line = 0
Value = {$value}
XMLPhoneBook = 
{/loop_softkey}
#END Soft Keys

#Program UP Key
[ programablekey5 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_up_type}
Line = {$hardkey_up_line}
Value = {$hardkey_up_extension}
XMLPhoneBook =

#Program DOWN Key
[ programablekey6 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_down_type}
Line = {$hardkey_down_line}
Value = {$hardkey_down_extension}
XMLPhoneBook =

#Program LEFT Key
[ programablekey7 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_left_type}
Line = {$hardkey_left_line}
Value = {$hardkey_left_extension}
XMLPhoneBook =

#Program RIGHT Key
[ programablekey8 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_right_type}
Line = {$hardkey_right_line}
Value = {$hardkey_right_value}
XMLPhoneBook =

#Program OK Key
[ programablekey9 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_ok_type}
Line = {$hardkey_ok_line}
Value = {$hardkey_ok_value}
XMLPhoneBook =

#Program CANCEL Key
[ programablekey10 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_cancel_type}
Line = {$hardkey_cancel_line}
Value = {$hardkey_cancel_value}
XMLPhoneBook =

#Program FWD Key
[ programablekey14 ]
path = /config/vpPhone/vpPhone.ini
DKtype = {$hardkey_fwd_type}
Line = {$hardkey_fwd_line}
Value = {$hardkey_fwd_value}
XMLPhoneBook =

[ AdminPassword ]
path = /config/Setting/autop.cfg
Password = {$adminpw}
Retrieved from "http://www.mirtapbx.com/manual/index.php?title=Yealink_pre_v.72&oldid=443"