Configuring and using Ademco alarm receiver

From MiRTA PBX documentation
Revision as of 21:55, 20 September 2018 by Admin (talk | contribs) (Created page with "Asterisk can receive alarms from Ademco compatible devices using the following protocols: Contact ID, Express 4+1, Express 4+2, High Speed and Super Fast. The Asterisk applic...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Asterisk can receive alarms from Ademco compatible devices using the following protocols: Contact ID, Express 4+1, Express 4+2, High Speed and Super Fast.

The Asterisk application is quite simple and integrating it in a Multitenant PBX was not easy. Unfortunately, the configuration cannot be made from the tenant or maybe, I don't like to have the tenant to mess with this, so the configuration is reserved for the Admin, for now.

From a tenant point of you, in the DID destination, you need to choose the "Receive an Ademco Alarm report". When the alarm system will dial the number, the system will read the details and write an event entry in Status/Call History - Alarms received

Alarmsreceived.png

Retrieved from "http://www.mirtapbx.com/manual/index.php?title=Configuring_and_using_Ademco_alarm_receiver&oldid=1328"