Installing MiRTA PBX

Installing MiRTA PBX is not a piece of cake and the automatic installer has been proven only on CentOS 6 64bit. Even with the automatic installer, a series of manual steps are required.

• Copy the installer script from pbx/protected/installMirtaPBX.sh to /usr/local/src in your new server
• Move to /usr/local/src
• Edit it and check the version, set to 6
• Check your hostname, change to something more useful if you have set to localhost
• Upgrade the Kernel by running

./installMirtaPBX.sh Kernel

• Reboot the server to be sure to have the latest kernel running
• Move again to /usr/local/src
• Install the system by running

./installMirtaPBX.sh

If there will be no errors, you'll have asterisk and voipmonitor compiled and installed.

Proceed in checking if SELinux is active and disable it

# getenforce
Enforcing
# setenforce 0
# getenforce
Permissive

Move in /var/www/html/pbx and start by configuring include/db.inc.php copying from include/db.inc.php.sample

1. cd /var/www/html/pbx
2. cp include/db.inc.php.sample include/db.inc.php

Edit the include/db.inc.php and fill in with the mtpbxname and mtpbxkey values provided