Activating PJSIP: Difference between revisions

From MiRTA PBX documentation
Jump to navigation Jump to search
No edit summary
No edit summary
 
(7 intermediate revisions by the same user not shown)
Line 3: Line 3:
Start by adding the required library
Start by adding the required library


yum -y install pjproject-devel opus-devel gsm-devel
<pre>
yum -y install pjproject-devel opus-devel gsm-devel xmlstarlet
</pre>


create a new /etc/asterisk/pjsip.conf file and enter the following info:
create a new /etc/asterisk/pjsip.conf file and enter the following info:


<pre>
[transport-udp]
[transport-udp]
type=transport
type=transport
protocol=udp
protocol=udp
bind=0.0.0.0:5080
bind=0.0.0.0:5080
;local_net=
;external_media_address=
;external_signaling_address=
[transport-tls]
type=transport
protocol=tls
bind=0.0.0.0:5081
;local_net=
;external_media_address=
;external_signaling_address=
cert_file=
priv_key_file=
method=tlsv1
[transport-tcp]
type=transport
protocol=tcp
bind=0.0.0.0:5082
;local_net=
;external_media_address=
;external_signaling_address=
[transport-wss]
type=transport
protocol=wss
bind=0.0.0.0
</pre>


edit extconfig.conf and add the pjsip table connections:
edit extconfig.conf and add the pjsip table connections:


<pre>
ps_endpoints => odbc,asterisk1,ps_endpoints,1
ps_endpoints => odbc,asterisk1,ps_endpoints,1
ps_endpoints => odbc,asterisk2,ps_endpoints,2
ps_endpoints => odbc,asterisk2,ps_endpoints,2
Line 24: Line 57:
ps_endpoint_id_ips => odbc,asterisk1,ps_endpoint_id_ips,1
ps_endpoint_id_ips => odbc,asterisk1,ps_endpoint_id_ips,1
ps_endpoint_id_ips => odbc,asterisk2,ps_endpoint_id_ips,2
ps_endpoint_id_ips => odbc,asterisk2,ps_endpoint_id_ips,2
ps_contacts => odbc,asterisk1,ps_contacts,1
ps_contacts => odbc,asterisk1,ps_contacts_****,1
ps_contacts => odbc,asterisk2,ps_contacts,2
ps_contacts => odbc,asterisk2,ps_contacts_****,2
</pre>
 
Where **** is your hostname, like for sipregs
 
Edit sorcery.conf, comment all and add:
 
<pre>
[res_pjsip]
endpoint=realtime,ps_endpoints
auth=realtime,ps_auths
aor=realtime,ps_aors
domain_alias=realtime,ps_domain_aliases
contact=realtime,ps_contacts
 
[res_pjsip_endpoint_identifier_ip]
identify=realtime,ps_endpoint_id_ips
 
[res_pjsip_publish_asterisk]
asterisk-publication=realtime,ps_asterisk_publications
 
[res_pjsip_outbound_publish]
outbound-publish=realtime,ps_outbound_publishes
 
[res_pjsip_pubsub]
inbound-publication=realtime,ps_inbound_publications
 
 
</pre>

Latest revision as of 06:26, 27 June 2020

PJSIP is the new SIP stack for asterisk and even it seems not yet "stable" with changes on every new release, it is the only viable choice if you want to use a recent asterisk version. To use it with MiRTA PBX you need to install the latest asterisk version, but before compiling the new version, some activity needs to be performed.

Start by adding the required library

yum -y install pjproject-devel opus-devel gsm-devel xmlstarlet

create a new /etc/asterisk/pjsip.conf file and enter the following info:

[transport-udp]
type=transport
protocol=udp
bind=0.0.0.0:5080
;local_net=
;external_media_address=
;external_signaling_address=

[transport-tls]
type=transport
protocol=tls
bind=0.0.0.0:5081
;local_net=
;external_media_address=
;external_signaling_address=
cert_file=
priv_key_file=
method=tlsv1

[transport-tcp]
type=transport
protocol=tcp
bind=0.0.0.0:5082
;local_net=
;external_media_address=
;external_signaling_address=

[transport-wss]
type=transport
protocol=wss
bind=0.0.0.0

edit extconfig.conf and add the pjsip table connections:

ps_endpoints => odbc,asterisk1,ps_endpoints,1
ps_endpoints => odbc,asterisk2,ps_endpoints,2
ps_auths => odbc,asterisk1,ps_auths,1
ps_auths => odbc,asterisk2,ps_auths,2
ps_aors => odbc,asterisk1,ps_aors,1
ps_aors => odbc,asterisk2,ps_aors,2
ps_domain_aliases => odbc,asterisk1,ps_domain_aliases,1
ps_domain_aliases => odbc,asterisk2,ps_domain_aliases,2
ps_endpoint_id_ips => odbc,asterisk1,ps_endpoint_id_ips,1
ps_endpoint_id_ips => odbc,asterisk2,ps_endpoint_id_ips,2
ps_contacts => odbc,asterisk1,ps_contacts_****,1
ps_contacts => odbc,asterisk2,ps_contacts_****,2

Where **** is your hostname, like for sipregs

Edit sorcery.conf, comment all and add:

[res_pjsip]
endpoint=realtime,ps_endpoints
auth=realtime,ps_auths
aor=realtime,ps_aors
domain_alias=realtime,ps_domain_aliases
contact=realtime,ps_contacts

[res_pjsip_endpoint_identifier_ip]
identify=realtime,ps_endpoint_id_ips

[res_pjsip_publish_asterisk]
asterisk-publication=realtime,ps_asterisk_publications

[res_pjsip_outbound_publish]
outbound-publish=realtime,ps_outbound_publishes

[res_pjsip_pubsub]
inbound-publication=realtime,ps_inbound_publications